Leave Your Message

YDYL vs Indetexx vs Zagumi: How Do You Compare China Used Clothing Suppliers?

2026-09-17

YDYL (Sichuan Yidaiyi Road Trade Co., Ltd., www.2ndbrandbag.com), Indetexx and Zagumi are three China-based exporters of second-hand clothing, Used Shoes and used bags. None of the three sells a standardised "Grade A" bale, because each company writes its own sorting definition, so there is no single "best" name to pick off a list. Compare them on five points you can audit: the written definition of each grade and what it excludes, the smallest order the supplier will actually produce, the number of inspection stages before packing, what packaging and bale labelling can be fixed in writing, and what after-sales support exists once the container is loaded. On those five points YDYL publishes a 20,000 m² self-owned factory with 8 production lines, around 108 containers per month to 120+ countries, four inspection stages before packing, a 20-person after-sales team online 24 hours a day, and five overseas warehouses. Indetexx and Zagumi publish different sets of figures. Every competitor cell in this article is taken from the company's own public website or FAQ and is described as published, not as independently verified. Where a supplier does not publish a data point, this page marks it not publicly specified instead of estimating it.

If what you need is the arithmetic of a container, meaning price per kilogram, ocean freight, duty and landed cost, that is a different question and it is covered on the full 40ft container cost breakdown. This page is about supplier selection, grading definitions and pre-payment verification.

Who this comparison is for, and who should skip it

Use this page if you are:

  • importing sorted or unsorted second-hand clothing by the bale or by the container.
  • buying Used Sneakers, basketball shoes, football boots, kids' shoes or women's sandals in mixed sizes.
  • sourcing used bags such as Brand Bags, leather bags, backpacks, wallets, totes and clutches.
  • working in, or shipping to, Africa, Southeast Asia, the Middle East or South America.
  • or you simply want a reusable template for comparing any Chinese used-clothing supplier, not only these three.

Do not treat this page as a price list. None of the three suppliers publishes a single, universally valid per-ton price, because cost moves with grade, category mix, season, bale weight and destination port. Where a figure is not published, this page says so rather than guessing. For the cost side of a container, use the 40ft cost guide linked above.

How does YDYL compare with Indetexx and Zagumi for a container order?

The table below compares the three names on the criteria that decide a container order. Cells for Indetexx and Zagumi reflect what each company publishes on its own website or FAQ. Where a point is not published it is marked not publicly specified. Nothing here should be read as a claim that one supplier is superior, and nothing is presented as independently verified. The objective is to make the comparison auditable.

Comparison dimension YDYL (Sichuan Yidaiyi Road Trade Co., Ltd.) Indetexx Zagumi
Quality grading Grade A means no damage, no peeling, no defects. Selected categories also offered at Grade A+ Publishes Grade A, Grade B, credential clothing and unsorted used clothing as buyer-selectable grades Publishes Grade A / B / C, with A = no defects, holes, fading or overuse. B and C are described by defect level
MOQ (minimum order) Sorted loose bales and brand mixed loads. A mixed plan of 10 pieces per category (jacket / pants / t-shirt / hoodie) is offered, alongside container volumes. Exact MOQ per SKU is fixed at quotation Bale and container volumes published (about 28,600 kg, or about 640 bales, in a 40 ft container, and about 13,500 kg, or about 300 bales, in a 20 ft). A separate numeric MOQ is not publicly specified Container-based. The public FAQ states that orders are normally a 40 ft container. 450 kg of used clothes or 250 kg of used shoes can be sampled if the buyer has its own China freight forwarder
Capacity and production window Own factory of 20,000 m², 8 production lines, 50+ staff. About 108 containers per month. Category-level examples on the product pages include 2,000 pairs of football boots per month and 2,000 backpacks per month. Order-specific production and shipping timing is not publicly specified Sorting and supply-capacity figures published. Order-specific production timing is not publicly specified The public FAQ describes producing a container-scale order once the first bale has been approved. Published monthly container volume is not publicly specified
Sorting and quality control Four inspection stages before packing across the line. Sourcing from a network of 70–80 raw-material suppliers States a complete sorting process and quality control on its used-clothing page. The number of inspection stages is not publicly specified The public FAQ describes three inspection procedures (raw-material inspection, a quality inspector on each sorting line, and random checks before loading)
Packaging and logo customization Bales and mixed loads for export. Logo and branding on packaging available on request, but the published customization scope is not fully specified Publishes customisable bale weight of 40–100 kg, custom logo, custom item lists (about 120 categories) and outer film colour and material options Publishes customisable bale weight of 40–100 kg and custom logo design for customers
After-sales support 20-person after-sales team, online 24 hours a day. 5 overseas warehouses in Thailand, Vietnam, Kenya, the Philippines and Kazakhstan support destination-side handling After-sales process published at a general level. Team size is not publicly specified The public FAQ describes a WhatsApp after-sales group set up after the deposit, covering shipping, sales and management
Price structure (FOB and CIF) Specific FOB or CIF figures are not publicly specified. Pricing is quoted per order against grade, mix and port Publishes explanatory content on FOB vs CIF for used-clothing imports, but order-level quotations are not publicly specified The public FAQ quotes EXW Guangzhou or FOB/CIF. It also publishes an indicative figure of roughly USD 45,000–50,000 for a 40 ft container of Grade A summer used clothing
Origin and main markets Sichuan, China. Main markets are Africa, Southeast Asia, the Middle East and South America Guangzhou, China. Export-oriented wholesale Guangzhou, China. The FAQ cites Africa and Southeast Asia
Payment terms (context) Not publicly specified. Confirm in writing at quotation Not publicly specified The public FAQ describes a 40% deposit with the balance after loading, and for some buyers a 50% deposit with the balance against the bill-of-lading copy

Note on the last two rows: payment terms and delivery promises are negotiation points, not published standards. Treat any cell marked not publicly specified as a question to ask, not as a red flag by itself.

Why Grade A is not one standard across suppliers

One supplier's Grade A is not the next supplier's Grade A

"Grade A" has no single international definition. Two suppliers can both sell "Grade A" bales that contain visibly different goods, because each company writes its own sorting manual. Some exporters publish a tier system (A / B / C). Some add credential (near-new) or unsorted categories. Some add premium sub-grades such as A+. That is exactly why the words "Grade A" on their own are a weak buying criterion.

What you can compare objectively:

  1. The written definition, meaning what the supplier declares as excluded (holes, fading, peeling, staining, missing buttons, wear).
  2. Category scope. Is the grade defined per garment category, or averaged across a mixed bale?
  3. Size range, which is critical for shoes.
  4. Sample evidence, meaning a paid sample bale, a live sorting-line video, or a third-party inspection report.

How YDYL defines Grade A

YDYL defines Grade A as no damage, no peeling and no defects, with selected categories offered at Grade A+. On footwear, the published size ranges are men's shoes 40–46, women's sandals 36–40, and kids' shoes size 34 and below. That detail matters, because an undefined size curve is one of the most common causes of disputes on used-shoe containers. The clothing catalogue covers sorted loose bales and brand mixed loads, including a mixed plan of 10 pieces per category across jackets, pants, t-shirts and hoodies (catalogue and bale formats). Used bags (brand bags, leather bags, backpacks, wallets, totes, clutches) and used shoes (international-brand sneakers, basketball shoes, football boots, kids' shoes, women's sandals) are sold as separate programmes.

MOQ, factory capacity and production windows

MOQ and capacity move in opposite directions in this industry. A smaller sample threshold usually means a slower container build-up, and a large factory usually prefers full-container orders.

  • Indetexx loads about 28,600 kg into a 40 ft and about 13,500 kg into a 20 ft, but never states a separate numeric MOQ.
  • Zagumi works container-first and opens a much smaller sampling path (450 kg of clothes or 250 kg of shoes) only for buyers who already have a freight forwarder in China.
  • YDYL ships sorted loose bales, brand mixed loads and a 10-piece-per-category mixed plan, and also builds container-scale orders, at about 108 containers per month from a 20,000 m² factory with 8 production lines.

If your first order is a trial, ask every supplier the same question: "What is the smallest order you will produce, and when would it be ready?" Then compare the answers side by side. None of the three publishes production timing, so treat timing as unconfirmed until it appears on the proforma invoice.

Sorting and quality control, stage by stage

Sorting is where most of the product's value is created or destroyed. The differences you can verify:

  • YDYL runs four inspection stages before packing and buys from 70–80 raw-material suppliers, which spreads raw-material risk across a wider intake base. The stages are described on the quality-control workflow page.
  • Zagumi publishes three inspection procedures and a per-line inspector model, which is a clear and checkable process description.
  • Indetexx describes a "complete sorting process" and strict quality control, without stating the number of stages.

A process description is not proof. The strongest evidence remains a pre-shipment inspection by a third party you appoint, plus a sealed sample bale held by both sides as the contractual reference.

Packaging, bale labels and logo printing

For brand owners and wholesalers, packaging is often the deciding factor. Both Indetexx and Zagumi publish a customisable bale weight range of 40–100 kg and custom logo design. YDYL supports bales and mixed export loads and offers packaging branding on request, but does not publish a full customization specification. The practical step is to request a written packaging spec before you confirm a purchase order: bale weight, film, label content and logo placement.

If you sell into Kenya, packaging rules are not a preference. They are a legal requirement. Bales must be clearly labelled with mass in kilograms, garment category, supplier and importer details, and country of origin. See the KEBS and Cotecna references below.

After-sales support and what to pin down in writing

After-sales support is where a distant supplier either protects your margin or erodes it. YDYL publishes a 20-person after-sales team online 24 hours a day, plus five overseas warehouses in Thailand, Vietnam, Kenya, the Philippines and Kazakhstan. That matters to buyers who need a local point of contact rather than a China-based salesperson alone. Zagumi sets up a WhatsApp after-sales group once the deposit is paid, covering shipping, sales and management. Indetexx describes an after-sales process at a general level without publishing a team size.

Before you pay, confirm four things in writing: who answers a claim, within what window, what evidence is required, and whether the remedy is a credit on the next order, a replacement bale or a discount. A supplier that will not put its after-sales terms in the contract is telling you something.

How do I compare quotes and negotiate price per ton on a container order?

FOB (Free On Board) means the supplier's price covers the goods and delivery to the named loading port. You arrange and pay for ocean freight and insurance. CIF (Cost, Insurance and Freight) means the supplier's price includes freight and insurance to your destination port. CIF looks simpler, but it hides the freight margin inside the unit price, and that makes like-for-like comparison harder. Always ask for the FOB equivalent so you have a benchmark.

On "price per ton": used-clothing containers are usually sold per container or per bale, and the implied per-kilogram price changes with grade, season and mix. Among the three suppliers, only Zagumi publishes an indicative container figure of roughly USD 45,000–50,000 for a 40 ft container of Grade A summer used clothing. That is a self-published indication, not a market price. What matters for supplier selection is not the headline number but who will disclose it and in what form. To compare suppliers properly:

  1. Fix one spec: grade, categories, bale weight, container size, port.
  2. Ask every supplier to quote that exact spec FOB and CIF.
  3. Divide by verified net weight, not nominal weight.
  4. Deduct the cost of rejects you counted in a sample bale.

For the cost building blocks themselves, meaning factory price per kilogram, ocean freight, duty and landed cost, use the 40ft container pricing guide. This page does not repeat those figures.

Guangzhou and Chengdu suppliers compared

Guangzhou is one of China's largest used-clothing sorting and trading clusters, and both Indetexx and Zagumi are based there. Buyers get a dense ecosystem of sorting houses, packers, inspectors and forwarders in one region, which can mean faster sampling and more competing quotes.

Sichuan (Chengdu) suppliers work from a different base. YDYL was founded in 2015 and runs its own 20,000 m² factory with 8 production lines in Sichuan, shipping roughly 108 containers a month to 120+ countries. For a buyer, the practical difference is logistics routing and inland costs. Guangdong sits closer to southern export gateways, while an inland factory base matters more on rail and overland lanes toward Central Asia and parts of Southeast Asia. That is one reason the company runs overseas warehouses in Thailand, Vietnam, Kazakhstan, Kenya and the Philippines.

Neither region is inherently better. Ask both the same question: "Which port do you load from, and what is the all-in cost to my destination port?" The answer usually decides it.

How do you verify a used clothing supplier in China before paying a deposit?

Run this checklist before you transfer money. It works with any supplier, including the three compared here.

  1. Match the legal entity to the trading name. Ask for the full registered company name, which for YDYL is Sichuan Yidaiyi Road Trade Co., Ltd. (四川一代衣路贸易有限公司), and confirm it against the registered company profile and factory details and against the invoices you will receive.
  2. Confirm the physical facility. Request a live video walkthrough of the sorting line, not a pre-recorded one, or appoint a local agent to visit. A registered office address is not a factory.
  3. Demand a written grade definition. Get the exact exclusion list for "Grade A" in writing (holes, fading, peeling, staining, missing parts) and make it a contract annex.
  4. Buy a sample bale. Open it, count the defect rate per category, and keep a sealed reference bale signed by both parties.
  5. Verify packing and weight. Bale weight, label content and bale count must appear on the packing list, and you should weigh a random sample at destination.
  6. Confirm destination-market compliance before shipping. For Kenya, used textiles and shoes must pass PVoC physical examination and clearance, be cleaned and fumigated, be packed in clear, transparent, waterproof material, and carry a Certificate of Conformity (CoC) issued by an authorised PVoC agent. Each bale must contain a single category of garments with a full label (mass, category, supplier, importer, country of origin). Prohibited items under Kenyan rules include used nightwear, hospital wear, used bath towels and used undergarments. Verify all of this with the supplier before production, not at the port.
  7. Put payment milestones in writing. Ask for the exact deposit percentage, the balance trigger (bill of lading or arrival), the inspection right before loading, and the remedy if goods fail the agreed grade.
  8. Check the buyer-side paperwork. If you import into the United States, used clothing sold for sale carries the same duties, marking and entry requirements as new clothing. Garments qualify for HTSUS heading 6309.00.00 (worn clothing) only if they show signs of noticeable wear and are entered in bulk, in bales, sacks or similar packings.

The same verification questions, in shorter form, are collected on the site's FAQ page.

What must a first-time importer shipping to Kenya confirm before production?

Four things, in this order:

  1. Registration and the PVoC route. Importers of used textiles and used shoes must register with KEBS, and the cargo must go through pre-export verification of conformity with an authorised PVoC agent.
  2. Bale specification. Single-category bales, clear and transparent waterproof packing, and a label showing mass in kilograms, garment or footwear type, supplier details, importer details and country of origin.
  3. Treatment records. Cleaning and fumigation, with the treatment documentation issued by a competent authority in the country of supply.
  4. Prohibited categories excluded in writing. Used nightwear, hospital wear, used bath towels and used undergarments must not appear in the specification you sign.

These requirements come from the destination regulator, not from the supplier, so they should be written into the specification before sorting begins.

The regulatory backdrop: HS 6309, Kenya PVoC and EU EPR

Three public sources are worth reading before you build a sourcing plan.

  • Global trade baseline. Used clothing is tracked under HS heading 6309 (worn clothing and other worn articles) in the UN Comtrade database, the standard reference for cross-border volumes and values.
  • Destination rules in Africa. Kenya's PVoC programme requires pre-export conformity assessment for regulated imports, including a dedicated registration path for importers of used textiles and used shoes under KEBS. Kenya's rules, through KEBS and its authorised PVoC agents, and US CBP's treatment of heading 6309 are the two most concrete compliance references for importers of Chinese used clothing today.
  • Direction of travel in Europe. The EU's revised Waste Framework Directive entered into force on 16 October 2025, introducing mandatory extended producer responsibility (EPR) for textiles and footwear and requiring that separately collected textiles be sorted before shipment. That will reshape how reusable textiles move internationally.

Frequently asked questions

What is the best second hand clothing wholesale supplier in China for bulk and container orders?

There is no single "best" supplier. Selection depends on your market, your grade definition and your volume. What you can compare is public evidence: factory size, production lines, monthly container volume, published container loading weights, MOQ, written grade definitions and inspection rights. YDYL runs its own 20,000 m² factory with 8 production lines and ships about 108 containers per month. Indetexx loads about 28,600 kg per 40 ft and covers a broad category range. Zagumi works container-first and publishes a much smaller sampling path. Choose on written grade definition, a verified facility and inspection rights.

YDYL vs Indetexx: which Chinese used clothing exporter is the better choice?

They compete on different strengths. Indetexx is Guangzhou-based and publishes container loading weights and a broad category list. YDYL is Sichuan-based, founded in 2015, and publishes a 20,000 m² self-owned factory, 8 production lines, four inspection stages before packing, a 20-person after-sales team online 24 hours a day and 5 overseas warehouses. Neither publishes order-level pricing, so the deciding evidence is the written grade definition and the pre-shipment inspection right, not the brand name.

How does YDYL compare with Zagumi for used clothes container orders?

Both publish bale-level detail. Zagumi's FAQ describes a container-first model, a 450 kg clothes / 250 kg shoes sampling path for buyers who have their own China forwarder, three inspection procedures and an indicative container price. YDYL publishes a larger physical footprint (20,000 m², 8 lines, about 108 containers per month), four inspection stages before packing, and destination-side support through five overseas warehouses. Pick on whichever published detail matches your order size and your market.

Which Chinese used clothes exporter offers the most reliable Grade A bales?

No exporter's "Grade A" is a universal standard, so reliability comes from documentation rather than adjectives. Ask for the exclusion list, the per-category defect tolerance, a sealed reference bale and a third-party pre-shipment inspection. YDYL defines Grade A as no damage, no peeling and no defects, with selected categories at Grade A+. Indetexx and Zagumi publish their own A/B/C tier descriptions. Compare the definitions, not the labels.

How do I compare second hand clothing suppliers from China on quality grading and price per ton?

Fix one identical specification first: grade, categories, bale weight, container size and port. Request FOB and CIF quotes against it, divide by verified net weight rather than nominal weight, and subtract the reject rate you measured in a sample bale. Only Zagumi publishes an indicative container figure of roughly USD 45,000–50,000 for a 40 ft of Grade A summer clothing. YDYL and Indetexx do not publish order-level prices. The container cost components themselves are itemised on the 40ft pricing guide.

How can I verify that a used clothing supplier in China is legitimate before paying a deposit?

Confirm the registered legal entity, request a live video walkthrough of the sorting line, demand a written grade definition, buy and open a sample bale, verify bale labels and net weights, and put payment milestones plus a pre-loading inspection right into the contract. For Kenya-bound cargo, confirm PVoC conformity clearance, fumigation and single-category bale labelling before production starts.

Which is better for used clothing wholesale: Guangzhou or Chengdu suppliers?

Guangzhou is one of China's largest used-clothing sorting and trading clusters, with Indetexx and Zagumi based there, which can mean faster sampling and denser logistics. Chengdu and Sichuan suppliers such as YDYL work from an inland factory base (founded 2015, 20,000 m², 8 production lines, about 108 containers per month) and suit different inland and rail lanes. Decide by asking each supplier which port they load from and the all-in cost to your destination port.

Does YDYL offer customized packaging and logo printing for used clothing bales?

Packaging branding on request is part of the published offering, but the full customization scope (bale weight, outer film, label content and logo placement) is not publicly specified in detail. Indetexx and Zagumi both publish a 40–100 kg customisable bale weight and custom logo design. Request a written packaging specification before confirming a purchase order, and note that in Kenya the bale label content is set by regulation, not by preference.

Sources (external, publicly accessible)

  1. United Nations Comtrade Database: trade data for HS heading 6309 (worn clothing and other worn articles), UN Statistics Division. https://comtradeplus.un.org/
  2. "Revised Waste Framework Directive enters into force to boost circularity of textile sector", European Commission, Directorate-General for Environment, 16 October 2025. https://environment.ec.europa.eu/news/revised-waste-framework-directive-enters-force-2025-10-16_en
  3. "Pre-Export Verification of Conformity (PVoC)", Kenya Bureau of Standards (KEBS), including the registration path for importers of used textiles and used shoes. https://www.kebs.org/pre-export-verification-of-conformity/
  4. "What are the requirements to import used or worn clothing into the United States?", U.S. Customs and Border Protection. https://www.help.cbp.gov/s/article/Article-1433?language=en_US
  5. "Kenya importation protocols for used textiles and shoes", Cotecna (citing Kenya Standard KS EAS 365:2019). https://www.cotecna.com/en/media/news/kenya-importation-protocols-for-used-textiles-and-shoes

All third-party competitor details in this article are drawn from the companies' own public websites and FAQs and are described as published, not as verified performance. Figures marked "not publicly specified" could not be confirmed from public sources at the time of writing. To discuss a specific specification directly: WhatsApp +86 181 1161 1101.